Contact us to get more information
info@stahlmed.com
MICROTOME MXSTH 1915
Contact us to get more information.
info@stahlmed.com
TECHNICAL SPECIFICATION
- The tray of the device is able to cool down to -10 (+/- 1C) C.
- The cooling surface of the device is at least 60 blocks. This surface consist of a single area.
- The working area of the device is 40×30 cm.
- A Digital Screen added on the device and values can be monitored on this screen.
- The device has anti-vibration feet.
- Optionally, lamp can be placed on the cassette working surface.
- The device operates at 220 V -50 Hz.
- The device warranted internationally for 1 years against any malfunction.
Contact us to get more information.
info@stahlmed.com
Stahlmed MXSTH 571 – MXSTH 632 isa modern paraffin embedding station with microprocessor control system. It is designed for use in pathology laboratories and for embedding histological tissue samples only in molten paraffin for the following tasks:
• To embed the sample, melt the solid paraffin and keep the melted paraffin at the required temperature.
• Pour paraffin into embedded molds where the samples are placed.
- The device ensures that all existing applications are combined in paraffin embedding.
- The device can be controlled under the microprocessor control.
- The device can be one-piece or two-piece modular.
- The start time of the device can be programmed differently for each day of the week, thus saving energy.
- It has a large touch LCD screen that shows all data about the device and shows all data.
- The information in the menus opened on the screen can guide the user.
- The device is insulated against paraffin leaks.
- The device has a non-disposable mesh porous filter system to ensure that the wax used remains clean.
- The device has a large storage tank with a heater that can take at least 150 block molds.
- The device has a wide stainless steel tank with a capacity of at least 150 cassettes, which allows the storage of baskets from tissue tracking devices.
- The temperature of this section can be adjusted between 0 – 70 ºC (+/- 1ºC).The device has a paraffin tank with a capacity of at least 4 liters, which allows long working periods.
- The cold plate should be capable of holding at least 60 blocks, and this part can be cooled to 0 to -20 ° C.
- Hot plate can be adjusted between 0 – 70 ºC (+/- 1ºC).The temperature of the tissue burial molding chamber can be adjusted between 50-70ºC (+/- 1ºC).
- The temperature of the paraffin tank can be adjusted between 0 – 70 ºC (+/- 1ºC).The working table, cassette opening section and collet heater sections are designed to transfer extra paraffin to a single heated chamber through the channels.
- Waste paraffin can be discharged from this compartment.
- There are at least 4 heated collet places on the device and these places are made of stainless material.
- The device operates at 220 V, 50 Hz.Made in Turkey and one-to-one product exchange guaranteed
Lot’s of chemicals used in laboratories release fumes in storage. These can be harmful to health and create an odour nuisance for laboratory staff. Chemical Storage Cabinets such problems simply vanish with Filters and Ventilation Systems. These fumes effectively removed by continuous ventilation system and keep the laboratory from this hazadous fumes!
• Height adjustable shelves, pull-out shelves with removable plastic sump, bottom collecting sumps, perforated inserts and grids or railed shelves *Can be connected to a technical exhaust system.
• Adjustable ventilation operating range
• 304 or 316 Quality Stainless Steel contruction
• Lockable to prevent unauthorised access
• Clip-on hinges, opening angle 270°
• Optional integrated fan for active ventilation option configuration with external fan
• Custom Build Products designed according to your laboratory conditions
Fume hood exhaust fans and Air extraction fume hoods are used as lab air ventilation systems that extract dangerous chemical fumes which is harmful to the health from the air inside laboratories. These air ventilation systems pull and filter air from the laboratories using fume hood exhaust fans to protect and maintain lab air quality and safety standards for the workers during their working.
- 304 Quality Stainless Steel Construction
- With/out Duct Models
- WxDxH: 1000x620x770 ( without internal Fan unit )
- Perforated Working Area
- Led Light with Light Intensity Controller
- Fan with Fan Speed Controller
- Custom Built Availability
We listen to all your demands and needs to design the suitable products for you.
Features:
- Long-lasting product
- Perforated or Imperforated Shelving
- Stainles Steel or Glassed Door options
- Fixed or Telescopic shelf systems
- Asid and chemical Resisting & durable units
- Suitable feet choise for the surface
- Liquid Collecting Tanks
Custom Bulid is available.
ORDER NOW
Last Comments